Introduction

Integrating a Yealink Cordless IP phone with Ooma Office is quick, and can be accomplished in just a few simple steps. Follow the instructions below to provision the phone and put it into service immediately without any manual configuartion.

Package Contents

Step 1: Register Phone Online

To get started, you must first add the Yealink Cordless IP Phone to your Ooma Office account. You can do this by visiting office.ooma.com/add_ip_phone and following the steps on that page.

Connect the Base Unit to the Network

Follow the instructions in the phone’s user manual to:

• Plug the base unit into power
• Connect the base unit to your Internet connection
• Insert the battery into the handset
• Connect the charging cradle to power
• Charge the handset

Pair Handset

If the handset displays Not registered, press and hold the pairing button on the base unit until the LED on the base begins to flash.

Press the Reg softkey on the handset. The handset should pair with the base unit and synchronize its configuration.

Once you see the correct date/time display on the handset, press the Speaker button. If you hear a dial tone, your handset is ready to make and receive phone calls.