Introduction

Setting up your Yealink IP phone with Ooma Office is quick and easy. Follow the instructions below to install your phone. You should be up and calling in a few minutes!

NOTE If you do not have an Ooma Office account, please visit http://office.ooma.com/signup.

Package Contents

Step 1: Add the Phone to Your Account

If your phone is labeled Ready to Call, you may skip this step and continue to Step 2.

Otherwise, you will need to add your new phone to your Ooma Office account.

Visit office.ooma.com/add_device and follow the on-screen instructions.

Step 2: Assemble Your Phone

Attach the phone stand to the body. Align the stand with the slots , and slide up until you hear a click. Connect the phone handset to the handset jack using the coiled phone cord.

NOTE If you need additional help assembling the phone, please refer to the phone manufacturer’s user manual that is included in your box.

Step 3: Connect Your Phone

Use the Ethernet cable that came with the phone to connect the INTERNET port on the back of the phone to any available Ethernet port on your router or switch.

Connect the power supply as shown below. Skip this step if using Power Over Ethernet (PoE).

When the phone has powered up and connected to the Internet, the startup process will commence automatically. This process will take several minutes, during which time your new IP phone may restart a few times. This is expected behavior.

Once you see your extension number (e.g. x1001) displayed on the screen along with your name, your phone is ready to use to make and receive calls!