Enter your Ooma IP phone's Wi-Fi credentials manually
If you don’t have a way to connect your Ooma IP phone to the office Ethernet using a hardwired cable, you may need to enter your office’s Wi-Fi credentials in your Ooma IP phone by hand. Find your model of Ooma IP phone below and then follow the corresponding instructions to get started.
Ooma 2602W
- Press the Menu softkey (menu icon)
- Use the arrow keys to select Settings, then Wi-Fi Settings
- If Wi-Fi is diabled, set Wi-Fi to Enabled
- Select Wi-Fi Network to have the phone scan for all available Wi-Fi networks within range
- Select your network from the list of available networks, then press the Connect softkey (link icon)
- Use your phone’s keypad to enter the Wi-Fi network’s password, then press the OK softkey (checkmark icon)
Note: To enter your password, you will need to use a multi-tap approach with the phone keypad. Press the corresponding number key repeatedly until the desired number or letter appears. For example, for uppercase A, press the 2 key until the uppercase A is shown. To access special characters, use the 1 key. You can also tap a softkey to toggle input modes to numbers only, lower case only, upper case only, or mixed (the default mode).
Ooma 2615W, Ooma 2624W
- Press the Menu softkey
- Use the arrow keys to select System, then Wi-Fi Settings
- If Wi-Fi is diabled, set Wi-Fi to Enabled
- Select Scan to have the phone scan for all available Wi-Fi networks within range
- Select your network from the list of available networks, then press the Connect softkey
- Use your phone’s keypad to enter the Wi-Fi network’s password, then press the OK softkey
Note: To enter your password, you will need to use a multi-tap approach with the phone keypad. Press the corresponding number key repeatedly until the desired number or letter appears. For example, for uppercase A, press the 2 key until the uppercase A is shown. To access special characters, use the 1 key. You can also tap a softkey to toggle input modes to numbers only, lower case only, upper case only, or mixed (the default mode).
Ooma WP810, Ooma WP825
- Press the Menu softkey
- Use the arrow keys to select Settings, then Network, then Wi-Fi Networks
- Select your network from the list of available networks, and press the Select button
- Use the arrow keys to select the Password field
- Use your phone’s keypad to enter the Wi-Fi network’s password, then press the Connect softkey
Note: To enter your password, you will need to use a multi-tap approach with the phone keypad. Press the corresponding number key repeatedly until the desired number or letter appears. For example, for uppercase A, press the 2 key until the uppercase A is shown. To access special characters, use the star key. You can also tap the # key to toggle input modes to numbers only, lower case only, upper case only, or mixed (the default mode).